AP / 무선 브리지

ANCP3005Q 요약정보 및 구매

PROFESSIONAL WI-FI CPE NETWORK BRIDGE

상품 선택옵션 0 개, 추가옵션 0 개



PROFESSIONAL WI-FI CPE NETWORK BRIDGE


AIVO Network's ANCP3005Q is a professional Wi-Fi communication device, which enables connection from existing LAN to remote location using the latest wireless technology. We strongly recommend professional installation.


• High Power Indoor/Outdoor CPE with Qualcomm® Atheros Chipset

• Range up to 6 miles away with line of sight

• Can be used to connect remote IP cameras to existing NVR’s / DVR’s

• Supports up to 300Mbps

• Utilizes the 5.8Ghz Wi-Fi frequency, avoiding the congested 2.4Ghz bandwidth in use on most Wi-Fi today.

• Dual 14dBi antennas

• Supports the following operation modes: Bridge, Access Point, Router and Repeater

• Supports providing PoE power to a single IP camera attached to CPE

• Includes 48V PoE power injector which allows for powering CPE from up to 330ft. away

• LEDs provide information about system status and signal strength for alignment in Bridge mode

• Hardware Reset button

• Outdoor Rated down to -40°F

• Supports Pole, Wall or Rack Mounting



Additional programming may be necessary. Please consult with AVYCON's technical support team before mounting the bridge in its designated location. We recommend setting up the devices on a test bench first to ensure they are all programmed correctly for the desired application. These devices come out of the box in “Router” mode unless preconfigured differently as requested by distributors. Preconfigured bridges are usually labeled as such.

PROFESSIONAL WI-FI CPE NETWORK BRIDGE

General
CPUQualcomm AR9344 560Mhz CPU
SE2576L PA Chipset - 64MB DDR2 / 16MB SPI
AntennaIntegrated Dual 14 dBi Antennas
Wi-Fi Standards
IEEE802.11a/an
SecurityWPA, WPA2-AES or WPA2-PSK
RF Output Power200mW (23dBm)
RF Sensitivity-96dBm
RF Frequency802.11a/n: 5.180Ghz - 5.825Ghz
Bandwidth300Mbps
Physical Ports1 x 10/100 Mbps WAN Ethernet Port
1 x 10/100 Mbps LAN Ethernet Port
1 x Toggle switch for PoE output for IPC
1 x Reset Button

Ingress ProtectionIP66
LED IndicatorsPower / WAN / LAN / Wi-Fi Level Signal Strength
Power
PoE 802.3at/af
Adapter: 48V PoE Power Adapter
Power Consumption <8W
Installation MethodsPole Mounting, Wall Mounting or Rack Mounting
Product Dimensions 10.2” x 3.1” x 2.1” (262mm x 80mm x 53mm)
Net Weight0.7lbs
Working Environment-40°F ~ 131°F / 10% ~ 90% RH, Non-condensing
Storage Environment-58°F ~ 167°F / 5% ~ 90% RH, Non-condensing
  • File Name

There is no product.

IP Products Catalog

2020 IP PRODUCT GUIDE

HD Analog Products Catalog

2020 ANALOG HD PRODUCT GUIDE